21
Time for
cleaning
When the
fi
lter lamp in the
display lights up or blinks
It is not necessary to replace the pleated
fi
lter
until the
fi
lter lamp lights up or blinks.
Cleaning
method
Replace
Deodorising
catalyst unit
Front panel
UNIT1
Pleated
fi
lter
Remove the front panel and UNIT1.
1
Page 17.
►
Replace the pleated
fi
lter with a new
2
fi
lter.
Remove the used pleated
fi
lter.
1)
Release the pleated
fi
lter from the projections
•
(5 each on the right and left) of the deodorising catalyst
unit (front side).
Take out a new pleated
fi
lter from the
fi
lter
2)
container and then attach it to the deodorising
catalyst unit.
Fit the holes (5 each on the right and left) of the
•
pleated
fi
lter onto the tabs on the right and left of the
deodorising catalyst unit.
Insert the pleated
fi
lter underneath the tabs
•
(4 locations at the top and bottom) of the deodorising
catalyst unit.
Projection
(5 each on right and left)
Pleated
fi
lter
Deodorising
catalyst unit
Top and
bottom tabs
(4 locations)
Face the white
side to the front.
Attach UNIT1 and the front panel.
3
Page 17.
►
Connect the power plug.
4
Press the
fi
lter reset button on the upper
5
part of the front panel for 5 seconds.
(The
fi
lter lamp goes off with a short beep sound.)
Filter reset button
Even if the pleated
fi
lter is replaced, the
fi
lter lamp does not
•
go off unless you press the
fi
lter reset button for 5 seconds.
NOTE
Order the pleated
fi
lter for replacement from your dealer.
•
Replace the pleated
fi
lter when the
fi
lter lamp lights up or blinks
•
even if the
fi
lter looks clean. The amount of visible dirt does not
represent the capacity of the
fi
lter.
The replacement interval for the pleated
fi
lter varies according to
•
how the unit is used and where it is located.
The
fi
lter lamp lights up after about 2 years if the unit is used
every day in a house where 10 cigarettes per day are smoked.
(The replacement interval shortens when the unit is used where
the air is particularly dirty.)
When you have replaced the pleated
fi
lter before the
fi
lter lamp
•
lights up because of visible dirt or generation of odour, press the
fi
lter reset button for 5 seconds.
Options
ATTENTION
For replacement pleated
fi
lters contact the service shop.
•
Part
Model
Pleated
fi
lter 5 pcs.
KAC017A4E
If the unit is used with dirty parts
•
Air is not cleaned.
•
Odors are not removed.
•
Unnecessary odors may be generated.
•
Discard of the pleated
fi
lters as noncombustible waste.
•
Disposal requirements
Your product and the batteries supplied with the controller
are marked with this symbol. This symbol means that
electrical and electronic products and batteries shall not
be mixed with unsorted household waste.
For batteries, a chemical symbol can be printed beneath
the symbol. This chemical symbol means that the battery
contains a heavy metal above a certain concentration.
Possible chemical symbols are:
Pb: lead (>0.004%)
Hg: mercury (>0.0005%)
Disposal of this product must be done in accordance with relevant
local and national legislation.
Units and waste batteries must be treated at a specialized
treatment facility for re-use, recycling and recovery.
By ensuring correct disposal, you will help to prevent potential
negative consequences for the environment and human health.
Please contact the installer or local authority for more information.
Replacement of the Pleated Filter
01_EN_3P276413-2C.indd 21
01_EN_3P276413-2C.indd 21
9/27/2011 1:20:58 PM
9/27/2011 1:20:58 PM
