Daikin LX10F10A, Service Manual

Page: 93 / 126

4-4
※
12 Humidity Sensor Reading (Option)
1. Press keys to select HuS-Reading and press key to determine .
Then EFM runs with high speed and humidity is displayed.
When the difference between high pressure and low pressure is large (300kPa or more), unit enters
to pressure equalizing so that "Waiting---" is displayed.
※
13 All Sensor Calibration (Option)
Go to All Sensor Calibration in Manual Check for SS, RS, DSS and DRS.
Follow the same procedure for individual sensor calibration.
※
14 SS Sensor Calibration (Option)
※
15 RS Sensor Calibration (Option)
※
16 DSS Sensor Calibration (Option)
※
17 DRS Sensor Calibration (Option)
OFFSET SENSOR
VALUE
+0.0 ℃
+0.0 ℃
+0.0 ℃
+0.0 ℃
VALUE
+0.2 ℃
+0.4 ℃
+0.5 ℃
+0.3 ℃
SS
RS
DSS
DRS
All Sensor Calibration
Enter : When the temperature of
Ice-bath is stabilized at 0
℃
ESC : cancel
OFFSET
VALUE
+0.6 ℃
+0.4 ℃
-0.7 ℃
-0.6 ℃
SENSOR
VALUE
+0.4 ℃
+0.7 ℃
+0.1 ℃
-0.1 ℃
SS
RS
DSS
DRS
All Sensor Calibration
Enter : Delete former calibration
ESC : Return
Enter : Confirm
ESC : Cancel
Cancel former
calibration
Prepare
the Ice-bath
OFFSET SENSOR
VALUE VALUE
SS
RS
DSS
DRS
All Sensor Calibration
Complete
ESC : Return
All Sensor Calibration
Previous sensor values
Calibration completed
Sensor values after the
temperature of Ice-Bath is stabilized
+0.2 ℃
+0.4 ℃
+0.5 ℃
+0.3 ℃
+0.0 ℃
+0.0 ℃
+0.0 ℃
+0.0 ℃
Manual Check
NEXT
PREV
2/3
0.2 ℃
0.1 ℃
0.2 ℃
All Sensor Calibration
SS Sensor Calibration
RS Sensor Calibration
DSS Sensor Calibration
DRS Sensor Calibration
-----------
-----------
0.1 ℃
HuS Reading
ON
: Change
Enter : Confirm
ESC:OFF and Return
HuS Reading
Waiting ---
ESC : OFF and Return
HuS Reading
Humidity
70 %RH
Humidity
--- RH
: Change
Enter : Confirm
ESC:OFF and Return
ON
1/3
NEXT
Manual Check
---------
RM Circuit Check
HuS Reading
All Sensor Calib.