![background image](http://html1.mh-extra.com/html/daikin/ftyn25dv3b-aty20dv2/ftyn25dv3b-aty20dv2_service-manual_4216906051.webp)
Instructions
SiBE01-503
42
System Configuration
15
■
To use ON TIMER operation
1. Press “ON TIMER button”.
• The time changes in 1 hour increments
every time the button is pushed, with a maxi-
mum of 12 hours.
■
To cancel ON TIMER operation
2. Press “CANCEL button”.
• The TIMER lamp goes off.
■
To combine ON TIMER and OFF TIMER
• A sample setting for combining the two timers is shown below.
ATTENTION
■
In the following cases, set the timer again.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote controller.
1
2
ON
OFF
The TIMER lamp
lights up.
Display
(Example)
The air conditioner is currently
operating. You want to have it run for
another hour, then stop for 7 hours,
then start up again.
Summary of Contents for FTYN25DV3B ATY20DV2
