6 Energy saving and optimum operation
Operation manual
14
FTXTA30B2V1B(W)(B)
Daikin room air conditioner
3P485919-13U – 2021.03
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect using SSID and KEY number
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the AP mode display (menu
) appears.
3
Press
to confirm the selection.
Result:
is blinking. The operation and timer LEDs are blinking
alternately.
4
Connect your smart device to the access point in the same way
as to a standard wireless network.
5
Enter the SSID number and password located on the unit or in
the accessory set.
6
Open the Daikin Online Controller application and follow the
steps on the screen.
Result:
Wireless adapter mode will automatically change from
the AP mode to the RUN mode, the timer LED is blinking.
7
Press
to exit the menu.
Result:
The display will return to the default screen.
To reset the connection setting to the factory
default
Reset the connection setting to the factory default in case you want
to:
▪ switch between the WPS and the AP connection option,
▪ disconnect the Wi-Fi adapter and the communication device (e.g.
router) or smart device,
▪ repeat the setting if the connection was unsuccessful.
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display(menu ) appears.
2
Press repeatedly
or
until the A display (menu )
appears.
3
Hold
for at least 2 seconds to confirm the selection.
Result:
is blinking. The setting is reset to the factory default.
4
Press
to exit the menu.
Result:
The display will return to the default screen.
To turn off the wireless LAN connection
You can turn off the wireless connection using:
▪ the wireless adapter ON/OFF button on the unit,
▪ the user interface.
To use the wireless adapter ON/OFF switch
1
Press the wireless adapter ON/OFF switch.
Result:
The wireless adapter communication is OFF.
Note:
Press the ON/OFF switch again to turn on the wireless
adapter.
To use the user interface
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the OFF menu appears.
3
Hold
for at least 2 seconds to confirm the selection.
Result:
is blinking. Communication is OFF.
4
Press
to exit the menu.
Result:
The display will return to the default screen.
6
Energy saving and optimum
operation
INFORMATION
▪ Even if the unit is turned OFF, it consumes electricity.
▪ When the power turns back on after a power break, the
previously selected mode will be resumed.
CAUTION
NEVER expose little children, plants or animals directly to
the airflow.
NOTICE
Do NOT place objects below the indoor and/or outdoor unit
that may get wet. Otherwise condensation on the unit or
refrigerant pipes, air filter dirt or drain blockage may cause
dripping, and objects under the unit may get dirty or
damaged.
WARNING
Do NOT place a flammable spray bottle near the air
conditioner and do NOT use sprays near the unit. Doing so
may result in a fire.
CAUTION
Do NOT operate the system when using a room
fumigation-type insecticide. Chemicals could collect in the
unit, and endanger the health of people who are
hypersensitive to chemicals.
