5 Operation
Operation manual
8
FTXTA30B2V1B(W)(B)
Daikin room air conditioner
3P485919-13U – 2021.03
5.4
Airflow direction
When.
Adjust the airflow direction as desired.
What.
The system directs the airflow differently, depending on the
user selection (swinging or fixed position). It does so by moving
horizontal blades (flaps) or vertical blades (louvers).
Setting
Airflow direction
Vertical automatic
swing
Moves up and down.
Horizontal
automatic swing
Moves from side to side.
+
3-D airflow
direction
Moves alternately up and down and
from side to side
[—]
Stays in a fixed position.
CAUTION
ALWAYS use a user interface to adjust the position of the
flaps and louvers. When the flaps and louvers are swinging
and you move them forcibly by hand, the mechanism will
break.
The movable range of the flap varies according to the operation
mode. The flap will stop at the upper position when the airflow rate is
changed to low during the up and down swing setting.
5.4.1
To adjust vertical airflow direction
1
Press
.
Result:
appears on the LCD. The flaps (horizontal blades)
will begin to swing.
2
To use fixed position, press
when the flaps reach the
desired position.
Result:
disappears from the LCD. The flaps will stop
moving.
5.4.2
To adjust horizontal airflow direction
1
Press
.
Result:
appears on the LCD. The louvers (vertical
blades) will begin to swing.
2
To use fixed position, press
when the louvers reach the
desired position.
Result:
disappears from the LCD. The louvers will stop
moving.
INFORMATION
When the unit is installed in a corner of a room, the
direction of the louvers should be facing away from the
wall. Efficiency will drop if a wall blocks the air.
5.4.3
To use 3-D airflow direction
1
Press
and
.
Result:
and
appear on the LCD. The flaps (horizontal
blades) and louvers (vertical blades) will begin to swing.
2
To use fixed position, press
and
when the flaps
and louvers reach the desired position.
Result:
and
disappear from the LCD. The flaps and
the louvers will stop moving.
5.5
Comfort airflow and Intelligent eye
operation
You can use Comfort and Intelligent eye operation separately, or
combine them.
5.5.1
Comfort airflow operation
The unit will automatically change the direction of the airflow to heat
up or cool down the room more effectively. Direct airflow from the
unit will be less noticeable.
a
b
c
a
Flap position in cooling and dry operation
b
Flap range in heating operation (vertical airflow ON)
c
Flap position in heating operation (vertical airflow OFF)
In cooling and drying
The airflow direction will change to spread the air along the ceiling.
Comfort airflow ON
Comfort airflow OFF
In heating
The airflow direction will change to spread the air along the floor.
The unit detects the room and floor temperature and automatically
selects 1 of the 3 airflow directions.
Warming up
Downward direction
Vertical airflow
direction
INFORMATION
If you want to deactivate the Vertical airflow function (e.g.
in case there is furniture or another object under the unit),
refer to
"To turn ON/OFF vertical airflow function"
8]. If
the Vertical airflow function is deactivated, the airflow will
be set to downward direction.
INFORMATION
Powerful and Comfort airflow operation CANNOT be used
at the same time. The last selected function takes priority.
If the vertical automatic swing is selected, Comfort airflow
operation will be cancelled.
To turn ON/OFF vertical airflow function
1
Press
for at least 2 seconds.
Result:
The menu appears on the display.
2
Press
or
to change the menu screen.
Result:
The menu appears on the display.
