4 Before operation
Operation manual
5
FTXTA30B2V1B(W)(B)
Daikin room air conditioner
3P485919-13U – 2021.03
▪
Dust.
Dust on the signal transmitter or receiver will reduce
sensitivity. Wipe off dust with a soft cloth.
▪
Fluorescent lights.
Signal communication might be disabled if
fluorescent lamps are in the room. In that case, contact your
installer.
▪
Other appliances.
If the user interface signals operate other
appliances, move the other appliances, or contact your installer.
▪
Curtains.
Make sure that the signal between the unit and the user
interface is NOT blocked by curtains or other objects.
NOTICE
▪ Do NOT drop the user interface.
▪ Do NOT let the user interface get wet.
3.2.1
Components: User interface
Menu (push 2sec)
Panel (push 2sec)
d
a
g
m
h
c
b
n
l
f
e
i
j
k
p
o
Clean/Fireplace
a
Signal transmitter
b
LCD display
c
Temperature adjustment button
d
ON/OFF button
e
Vertical swing and menu (push 2 seconds) button
f
Horizontal swing button
g
Comfort airflow and Intelligent eye operation button
h
Select button
i
Clock and open panel (push 2 seconds) button
j
OFF/ON timer operation buttons
k
Weekly timer operation buttons
l
Flash Streamer and Fireplace logic operation button
m
Econo and Outdoor unit quiet operation button
n
Mode button
o
Powerful button
p
Fan button
INFORMATION
Use
(hold for 2 seconds) to open the front panel when
you clean the air filters. See
3.2.2
To operate the user interface
a ≥500
(mm)
a
Signal receiver
Note:
Make sure that there are no obstacles within 500 mm under
the signal receiver. They may influence reception performance of the
user interface.
1
Aim the signal transmitter at the signal receiver on the indoor
unit (maximum distance for communication is 7 m).
Result:
When the indoor unit receives a signal from the user
interface, you will hear a sound:
Sound
Description
Beep-beep
Operation starts.
Beep
Setting changes.
Long beep
Operation stops.
4
Before operation
4.1
To insert the batteries
The batteries will last for about 1 year.
1
Remove the front cover.
2
Insert both batteries at once.
3
Put back the front cover.
2
3
1
AAA.LR03
INFORMATION
▪ Low energy of battery is indicated by flashing of LCD
display.
▪ ALWAYS replace both batteries at once.
4.2
To mount the user interface holder
c
b
a
2×
