4 Before operation
Operation manual
6
FTXTA30B2V1B(W)(B)
Daikin room air conditioner
3P485919-13U – 2021.03
a
User interface
b
Screws (field supply)
c
User interface holder
1
Choose a place where the signals reach the unit.
2
Attach the holder with screws to the wall or a similar location.
3
Hang the user interface on the user interface holder.
4.3
To set the clock
Note:
If the time is NOT set,
, , and
blink.
1
Press
.
Result:
and blink
2
Press
or
to set the current day of the week.
3
Press
.
Result:
blinks.
4
Press
or
to set the correct time.
Note:
Holding down
or
increases or decreases the time
setting rapidly.
5
Press
.
Result:
Setting is complete. blinks.
4.4
To set the brightness of the indoor
unit display
1
Press
for at least 2 seconds.
Result:
The menu appears on the display. is blinking.
2
Press
.
3
Press
or
to change the setting as follows:
…is blinking
Brightness is…
High
Low
Off
4
To confirm the selected setting, press
.
Result:
The brightness setting is changed.
Note:
The display automatically returns to the default screen after
60 seconds. To return to the default screen sooner, press
twice.
4.5
To turn on the power supply
1
Turn the circuit breaker on.
Result:
The flap of the indoor unit will open and close to set the
reference position.
4.6
To change indoor unit position
setting
Set the indoor unit position to avoid direct airflow to walls.
1
Press
for at least 2 seconds.
Result:
The menu appears on the display.
2
Press
or
to change the menu to .
Result:
The menu appears on the display. blinks.
3
Press
to select the menu.
Result:
blinks.
4
Press
or
to change the setting as follows:
If the unit is…
Symbol
Blinks
Result
In the middle of the wall
(factory default setting)
≤500 mm from the wall
on right
≤500 mm from the wall
on left
Result:
The airflow range will be adjusted to avoid direct contact
with the wall.
