5 Operation
Operation manual
13
FTXTA30B2V1B(W)(B)
Daikin room air conditioner
3P485919-13U – 2021.03
To delete all reservations
Use this function if you want to delete all reservations for all days of
the week in one go. This procedure CANNOT be used in the setting
mode.
1
Hold
for about 5 seconds while in the default display.
Result:
All reservations will be deleted.
5.11
Wireless LAN connection
The customer is responsible for providing:
▪ Smartphone or tablet with minimum supported version of Android
.
▪ Internet line and communication device, such as a modem, router,
etc.
▪ Wireless LAN access point
▪ Installed free Daikin Residential Controller application
Note:
If needed, the SSID number and the KEY are located on the
unit or can be found in the accessory bag.
a
a
Label with SSID number and password
5.11.1
Precautions when using the wireless LAN
Do NOT use near:
▪
Medical equipment.
E.g. persons using cardiac pacemakers or
defibrillators.
This
product
may
cause
electromagnetic
interference.
▪
Auto-control equipment.
E.g. automatic doors or fire alarm
equipment. This product may cause faulty behaviour of the
equipment.
▪
Microwave oven.
It may affect wireless LAN communications.
5.11.2
To install the Daikin Residential Controller
application
1
Open:
▪ Google Play for appliances using Android.
▪ App Store for appliances using iOS.
2
Search for Daikin Residential Controller.
3
Follow the directions on the screen to install.
5.11.3
To set the wireless connection
There are two options to connect the wireless adapter with your
smart device.
▪
Connect the wireless LAN to your smart device directly.
▪
Connect the wireless LAN to your home network.
The wireless
LAN will communicate with your smart device in your home
network using a modem, router or a similar device.
For more information and FAQ refer to
.
1
Stop operation before setting the wireless connection.
2
Use the user interface to select the wireless LAN setting menu.
Note:
Always aim the user interface at the signal receiver on the
unit when operating the user interface.
Menu
Description
Connection status check
WPS connection setting
AP mode/RUN mode (SSID + KEY) connection
setting
Reset to factory default
Wireless LAN OFF
To confirm the wireless LAN connection status
1
Hold
for at least 5 seconds.
Result:
The confirmation display (menu ) appears.
2
Press
to confirm the selection.
Result:
is blinking.
3
Check the indoor unit LED.
…lamp is blinking.
Status
Timer
Communication is OK
Operation and timer
Communication is OFF
4
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect the wireless LAN to your home
network
The wireless adapter can be connected to your home network using
the:
▪
WPS
button on the router (if present),
▪
SSID
and
KEY
number located on the unit.
To connect using the WPS button
1
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu ) appears.
2
Press repeatedly
or
until the WPS setting display
(menu ) appears.
3
Press
to confirm the selection.
Result:
is blinking. The timer LED is blinking.
4
Press the WPS button on your communication device (e.g.
router) within approximately 1 minute. Refer to the manual of
your communication device.
INFORMATION
If the connection with your router is not possible, try
procedure
