Installation and operation manual
1
FMDQ50~125B7VEB
Air conditioning system
4PW48241-1
C
ONTENTS
Page
Before installation.............................................................................. 1
Important information regarding the refrigerant used........................ 2
Selecting installation site................................................................... 2
Preparations before installation......................................................... 3
Indoor unit installation ....................................................................... 4
Refrigerant piping work ..................................................................... 4
Drain piping work .............................................................................. 5
Electric wiring work ........................................................................... 6
Wiring example and how to set the remote controller ....................... 7
Wiring example ................................................................................. 8
Field setting....................................................................................... 8
Installation of the decoration panel ................................................. 10
Test operation.................................................................................. 10
Maintenance.................................................................................... 10
Disposal requirements .................................................................... 11
Wiring diagram ................................................................................ 12
B
EFORE
INSTALLATION
■
Leave the unit inside its packaging until you reach the
installation site. Where unpacking is unavoidable, use a sling of
soft material or protective plates together with a rope when
lifting, this to avoid damage or scratches to the unit.
■
Refer to the installation manual of the outdoor unit for items not
described in this manual.
■
Caution concerning refrigerant series R410A:
The connectable outdoor units must be designed exclusively for
R410A.
■
Do not place objects in direct proximity of the outdoor unit and
do not let leaves and other debris accumulate around the unit.
Leaves are a hotbed for small animals which can enter the unit.
Once in the unit, such animals can cause malfunctions, smoke
or fire when making contact with electrical parts.
Precautions
■
Do not install or operate the unit in rooms mentioned below.
-
Places with mineral oil, or filled with oil vapour or spray like in
kitchens. (Plastic parts may deteriorate.)
-
Where corrosive gas like sulphurous gas exists. (Copper
tubing and brazed spots may corrode.)
-
Where volatile flammable gas like thinner or gasoline is used.
-
Where machines generating electromagnetic waves exist.
(Control system may malfunction.)
-
Where the air contains high levels of salt such as air near the
ocean and where voltage fluctuates a lot (e.g. in factories).
Also in vehicles or vessels.
■
Do not install accessories on the casing directly. Drilling holes in
the casing may damage electrical wires and consequently cause
fire.
Accessories
Check if the following accessories are included with your unit.
Screws for fixing panels are attached to the air inlet panel.
Optional accessories
■
There are two types of remote controllers: wired and wireless.
Select a remote controller according to customer request and
install in an appropriate place.
Refer to catalogues and technical literature for selecting a
suitable remote controller.
■
When installing bottom suction: air inlet panel and canvas
connection for the air inlet panel.
FMDQ50B7VEB
FMDQ100B7VEB
FMDQ60B7VEB
FMDQ125B7VEB
FMDQ71B7VEB
Air conditioning system
Installation and
operation manual
READ THESE INSTRUCTIONS CAREFULLY BEFORE
INSTALLATION. KEEP THIS MANUAL IN A HANDY
PLACE FOR FUTURE REFERENCE.
IMPROPER INSTALLATION OR ATTACHMENT OF
EQUIPMENT OR ACCESSORIES COULD RESULT IN
ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR
OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY
TO USE ACCESSORIES MADE BY DAIKIN WHICH ARE
SPECIFICALLY DESIGNED FOR USE WITH THE
EQUIPMENT AND HAVE THEM INSTALLED BY A
PROFESSIONAL.
IF UNSURE OF INSTALLATION PROCEDURES OR USE,
ALWAYS CONTACT YOUR DAIKIN DEALER FOR
ADVICE AND INFORMATION.
Installation must be done by a licensed technician.
The choice of materials and installation must comply
with the applicable national and international
regulations.
Metal clamp
1 piece
Drain hose
1 piece
Washer for
hanging bracket
8 pieces
Medium
sealing pad
2 pieces
Insulation for fitting
Large sealing pad
1 piece
for gas pipe
1 piece
for liquid pipe
1 piece
Screws for duct
flanges
1 set
16 pieces
Other: installation and operation manual
1
2
Summary of Contents for FMDQ50B7VEB
Page 16: ...NOTES NOTES...
Page 18: ...4PW48241 1 Copyright Daikin...
