Daikin FDYB-KA Series, Engineering Data

Page: 61 / 66

Installation ED41-016B
60 FDYB-KA Series
Round crimp-style
terminal
Electric wire
Connect wires of
the same gauge to
both sides.
Do not connect
wires of the same
gauge to one side.
Do not connect
wires of different
gauges.
CORRECT WRONG WRONG
1 2 3
C : 3PN00281-18T-8
•
When connecting wires of the same gauge, connect them according to the
figure on right.
•
In wiring, make certain that prescribed wires are used, carry out complete
connections, and fix the wires so that outside forces are not applied to the
terminals.
Apply clamp to wiring so
as not to slide even if wiring
is pulled
Surely fasen wiring
by clamp
Power supply terminal board
Resine clamp
*Wiring between unit
∗
Do not clamp remote controller cords
together with wires connecting the units.
Doing so may cause malfunction.
Resine clamp
Resine clamp
Fig. 14
Remote controller terminal board
Ground the shield part of
shielded wire.
Refer to (NOTE 2) in
WIRING EXAMPLE (p. 8)
Earth screw
Shield part C-cup washer
Grounding terminal for
the remote controller
Noiseless earth
Remote controller cord
(Shield wire NOTE) 2)
5
5