background image

1

English

FAY71FJV1

FAY100FJV1

FAYP71BV1

FAYP100BV1

FAQ100BUV1B

FAQ100BVV1B

SPLIT SYSTEM Air 

Conditioner

Installation manual

CONTENTS

1. SAFETY CONSIDERATIONS .............................................................................. 1

2. BEFORE INSTALLATION .................................................................................... 2

3. SELECTING INSTALLATION SITE ..................................................................... 4

4. INDOOR UNIT INSTALLATION ........................................................................... 5

5. REFRIGERANT PIPING WORK .......................................................................... 7

6. DRAIN PIPING WORK ......................................................................................... 9

7. ELECTRIC WIRING WORK ............................................................................... 10

8. WIRING EXAMPLE ............................................................................................ 13

9. FIELD SETTING................................................................................................. 14

10. TEST OPERATION ............................................................................................ 16

11. WIRING DIAGRAM ............................................................................................ 19

1. SAFETY CONSIDERATIONS

Please read these “SAFETY CONSIDERATIONS” carefully before installing air conditioning equipment and 
be sure to install it correctly.  After completing the installation, make sure that the unit operates properly 
during the start-up operation.  
Please instruct the customer on how to operate the unit and keep it maintained.
Also, inform customers that they should store this installation manual along with the operation manual for 
future reference.
This air conditioner comes under the term “appliances not accessible to the general public”.

Meaning of warning and caution symbols. 

WARNING

  ......... Failure to observe a warning may result in death or serious injury.

CAUTION

 ........... Failure to observe a caution may result in injury or damage to the equipment.

WARNING

Ask your dealer or qualified personnel to carry out installation work. Do not try to install the machine your-
self.
Improper installation may result in water leakage, electric shocks or fire.

Perform installation work in accordance with this installation manual.
Improper installation may result in water leakage, electric shocks or fire.

Be sure to use only the specified accessories and parts for installation work.
Failure to use the specified parts may result in water leakage, electric shocks, fire or the unit falling.

Install the air conditioner on a foundation strong enough to withstand the weight of the unit.
A foundation of insufficient strength may result in the equipment falling and causing injuries.

Carry out the specified installation work after taking into account strong winds, typhoons or earthquakes. 
Improper installation work may result in the equipment falling and causing accidents.

Make sure that a separate power supply circuit is provided for this unit and that all electrical work is carried 
out by qualified personnel according to local laws and regulations and this installation manual.
An insufficient power supply capacity or improper electrical construction may lead to electric shocks or fire.

Make sure that all wiring is secured, the specified wires and used, and no external forces act on the 
terminal connections or wires.
Improper connections or installation may result in fire.

01_EN_3P184443-2.fm  Page 1  Monday, July 3, 2006  3:14 PM

Summary of Contents for FAY71FJV1


























Reviews: