2 General safety precautions
Installation manual
5
EZESHP20 EZLSHP20AUAW1B
Exigo E1500 Trailer Refrigeration Unit
4P726857-1 – 2023.03
CAUTION
Turn on the light before entering the cold room, and take a
portable torch with you.
To install a safety harness on the Exigo 1500 unit
DANGER
Always use a safety harness with
adjustable sling length and fall damper.
1
Remove one of the grids (a or f).
Note:
Use an industrial ladder
or another safe platform.
b
×8
c
×8
a
f
e
b
×8
c
×8
d
×8
d
×8
a
Upper right grid
b
Hexagon socket pan head screw
c
Contact washer
d
Retainer washer
e
Top panel
f
Upper left grid
2
Hook the safety harness sling (g) onto one of the two fixing
points (h).
h
h
g
g
Safety harness sling
h
Fixing point A1
3
Set the adjustable fall damper to 6 kg/Nm.
4
Adjust the length of the sling so the user does not touch the
ground when he falls.
2.2.2
Refrigerant
The unit is factory charged with refrigerant, no additional charging of
refrigerant is required.
WARNING
Refrigerant under pressure can escape
due to breaks in the cooling system, or
during work on the cooling system.
WARNING
Take sufficient precautions in case of
refrigerant leakage. If refrigerant gas
leaks, ventilate the area immediately.
Possible risks:
▪ Excessive refrigerant concentrations
in a closed room can lead to oxygen
deficiency.
▪ Toxic gas might be produced if
refrigerant gas comes into contact
with fire.
WARNING
▪ NEVER directly touch any accidental
leaking refrigerant. This could result
in severe wounds caused by frostbite.
▪ Do NOT touch the refrigerant pipes
during and immediately after
operation as the refrigerant pipes
may be hot or cold, depending on the
condition of the refrigerant flowing
through the refrigerant piping,
compressor, and other refrigerant
cycle parts. Your hands may suffer
burns or frostbite if you touch the
refrigerant pipes. To avoid injury, give
the pipes time to return to normal
temperature or, if you must touch
them, be sure to wear proper gloves.
2.2.3
Electrical
WARNING
Do not remove earth connections while installing the unit.
Missing earth continuity may lead into electrocution.
