7 Installation
Installation manual
15
EZESHP20 EZLSHP20AUAW1B
Exigo E1500 Trailer Refrigeration Unit
4P726857-1 – 2023.03
c
Exigo frame bolt
e
Flat washer (Ø13×35×5, DIN 6340 INOX)
f
Lock nut (M12, DIN 982 ZINC.)
14
Rotate the controller mounting plate (n) and slide it to the right.
15
Rotate the controller mounting plate (n) further, engaging the
screws in the open slot.
c
k
l
n
m
×4
×4
×4
2
1
3
k
Lock nut
l
Screw
m
Washer
n
Mounting plate
16
Fasten the lock nuts (k).
j
n
k
l m
k
l m
m
k
l
m k
l
j
Controller
k
Lock nut
l
Screw
m
Washer
n
Mounting plate
17
Evenly tighten all 8 lock nuts (f) to 81.6 N•m using a torque
wrench.
INFORMATION
When using electric or pneumatic tightening devices,
minimal speed setting is recommended.
18
Remove the lifting slings.
7.2.4
To install the top plate grids
DANGER
Always use a safety harness when working at height.
1
Standing on an industrial ladder (or other safe platform),
position the grids (c and d) on the top panel (e).
2
Install the screws (a) and washers (b) and tighten them.
b
×8
c
×8
a
f
e
b
×8
c
×8
d
×8
d
×8
a
Hexagon socket pan head screw (M6×20, UNI 7380
INOX)
b
Contact washer (Ø6.1×18×1.4 INOX)
c
Upper right grid
d
Upper left grid
e
Top panel
7.3
To install the bottom plate
The Bottom plate of the unit is not installed upon delivery, it is
deliverabled separately together with the necessary screws to attach
it to the unit.
DANGER: RISK OF ELECTROCUTION
The bottom plate, must be grounded via the unit's frame.
Connect the earth cable correctly to the frame.
1
Connect the bottom panel earth wire (a) to the connection stud
(b) on the bottom panel.
a
b
a
a
Earth wire
b
Connection stud
2
Position the bottom panel (c) on the unit.
3
Install the srews (e) and washers (d).
4
Tighten the srews (e) with a hexagonal key.
INFORMATION
The wiring of the grid electrical plug is already connected.
5
Using the screws (f) and washers (g), install the grid electrical
plug (h) on the bottom panel.
