1.6.2
57B
DANGER
While the product is powered up, do not change the wiring, or connect/disconnect
terminals, etc. Otherwise, there is a risk of electric shock, accidents and damage.
Do not turn on and shut off the power frequently. Otherwise, there is a risk of failures.
CAUTION
Set the pressure and flow rate such that they do not exceed the permissible range for
the machine. Otherwise, there is a risk of accidents.
Before running the product, set parameters appropriate for the machine. Otherwise,
there is a risk of injury, and failures of the machine.
Before running the product, ensure that you will be able to effect an emergency stop at
any time. Otherwise, there is a risk of injury, and failures of the machine.
When a power outage occurs, do not approach the machine since it is possible that it
will suddenly resume motion after the power is restored. Otherwise, there is a risk of
injury. It is advisable to set the start/stop signals to positive logic for starts to ensure
safe restarting.
While the product is powered up, and for some time after shutting the power off, the
heat-radiating fins and electronic devices will be hot, so do not touch them. Otherwise,
there is a risk of burns.
1.6.3
58B
DANGER
Maintenance inspections must be performed by an appropriately qualified technician.
Otherwise, there is a risk of electric shock and injury.
Check that the input power supply is OFF before starting the work. Otherwise, there is
a risk of electric shock.
Check that the motor is stopped, and wait at least 5 minutes after powering OFF
before starting the work. Otherwise, there is a risk of electric shock.
While the product is powered up, do not change the wiring, or connect/disconnect
terminals, etc. Otherwise, there is a risk of electric shock, accidents and damage.
Do not disassemble this product. Otherwise, there is a risk of electric shock and injury.
