4.
Press in the vicinity of the two screws at the bottom of the exterior cover to position it.
When pressing the vicinity of the screws, confirm that a clicking sound is heard as the projections
on the exterior cover go into the mating parts on the interior cover.
Check that the 7-segment display is located in the center of the display window in the operating
section.
5.
Tighten the two screws in the lower part of the cover, then tighten the two screws at the top.
Vicinity of screws
Exterior cover
(back face)
Interior cover
Projection
Mating part
Display window
Position check with the display window
Operating section sheet
