Daikin Clima-Flex CLIC Series Installation, Operation And Maintenance Manual Download Page 73

Page: 73 / 118

iom-clic-cf-eng

www.clima-flex.com

EXPORT REGISTRATION

The user can export to a USB memory stick all the information

stored in the unit as a csv file (comma separated values file), the

user can extract:

• Alarm log.

• Injection and return temperatures of the master unit.

• Injection and return temperatures of the slaves.

• User log.

If the user presses the reset button it will be possible to

reconfigure the system as a new installation. The reset resets the

initial configuration parameters of the system, but does not modify

any of the values stored in the controller’s memory.

Controller Use

Summary of Contents for Clima-Flex CLIC Series























































































































Search results

Summary of Contents for Clima-Flex CLIC Series

Reviews:

Related manuals for Clima-Flex CLIC Series

Brands by name

Popular brands

Daikin Clima-Flex CLIC Series, Installation, Operation And Maintenance Manual

Search results

Summary of Contents for Clima-Flex CLIC Series

Reviews:

Related manuals for Clima-Flex CLIC Series

Brands by name

Popular brands