Daikin Clima-Flex CLIC Series, Installation, Operation And Maintenance Manual

Page: 10 / 118

iom-clic-cf-eng www.clima-flex.com
10
The inside of the base rail is open to allow access to secure mounting bolts, etc. Mounting location dimensions are indicated on the
dimensional drawing beginning on page 21 . All compressor bolts, rubber, grommets and fasteners should be left in place in the base.
None of these fasteners are considered “temporary shipping bolts”.
Installation and Application Information
MOUNTING
TANDEM INSTALLATION (RECOMMENDATIONS)
For the correct installation of CLIC (Tandem) equipment, we need the installation kit that is already included in the equipment.
NOTE: Check the contents of kit.
The kit includes the following, depending on the tandem to be installed:
• Nipples for interconnection between mother and child equipment.
• A pair of nipples with thermowell for placement of general temperature sensors.
• Couplings for connection of vitaulic.
• 2 plugs for the mother equipment.
• General temperature sensors and wiring for communication between mother and child control.
NOTE: Applies to equipment in tandem mode, likewise it is recommended the installation in open areas for optimal operation
of the equipment, pre-heating of compressors, cleaning and purging of the hydronic system.
QTY QTY QTY QTY
4 PC VICTAULIC COUPLING 6” 4 PC VICTAULIC COUPLING 6” 4 PC VICTAULIC COUPLING 6” 4 PC VICTAULIC COUPLING 6”
2 PC VICTAULIC NIPPLE 6" X 13 5/8" 2 PC VICTAULIC NIPPLE 6” X 13 5/8” 2 PC
VICTAULIC NIPPLE 6” X 19 1/2”
WITH THREADS
2 PC
NIPPLE VICTAULIC COUPLING
6” X 32 1/2”.
2 PC VICTAULIC 6” PLUG 4 PC THERMOWELL
2 PC THERMOWELL