Daikin brp069a42, Technical Data Manual

Page: 96 / 161

95 • Control systems
• intelligent Touch Manager • ED721208
Initial setting
• DEC101A51 Switch Settings
Name Operation OFF ON
DS2
Abnormal input detection Open/Close
(Concentrated a4 to 7)
Abnormal input detection method
Open: Close (Normal) Æ Open (Abnormal)
Close: Open (Normal) Æ Close (Abnormal)
Open Close
DS3
Abnormal input detection Open/Close
(Concentrated a0 to 3)
Open Close
DS4
Buzzer output ON/OFF (Concentrated
a4 to 7)
ON/OFF switching of buzzer output of buzzer unit
upon detection of failure.
ON OFF
DS5
Buzzer output ON/OFF (Concentrated
a0 to 3)
ON OFF
DS6-1 Startup failure Masking time after detecting operation input. 10 seconds 30 seconds
DS6-2 Failure detection Recovery method upon detection of failure.
Automatic
reset
Retained
DS6-3 Monitor input Detection of failure under halting status. Yes No
Note:
All are set to “OFF” upon shipment from factory.
07
D 5
04 13
3 4 7
09 11 08 10
2 9 C A 0
05
E 6
06 12 01
B 8
03 14 00 15 02
F 1
2-00 ~ 2-15 1-00 ~ 1-15
RS2 DS1
8
3-00 ~ 3-15 4-00 ~ 4-15
➀
Set the top address of this equipment with the DIII-NET setting switch (DS1/RS1).
Using the DIII-NET setting switch (DS1), set the range of Address No. that is set in
this equipment. Address Nos. 1-00 to 1-15 are factory controlled before shipment.
Control range DS1
When a product is discharged
from the factory.
<when a product is
discharged from the factory>
Address No. indicates the
following portion in this case
In this case, it follows that this
equipment uses Address Nos.
1-08 to 1-15.
(8 numbers max.)
1-08
<Example>
When Address No. is
set to 1-08
This indicates the switch knob.
RS1 Switch Setting Table
Position
Address No.
Set Address No. (low order) with the centralized address setting switch (RS1)
Referring to the table below, set the address number low order.
(Address Nos. are 1-00, 1-01, --- 1-15, 2-00, --- 4-15.)
Control range DS1 (high order)
setting
(Address range)
ON ON ON ON
High
order
High
order: 1
Low
order
Low order
Low
order: 8
ON