Daikin brp069a42, Technical Data Manual

Page: 157 / 161

W
e car
e
Seasonal efficiency - Smart use of
energy Seasonal efficiency gives a more realistic indication on how efficient air conditioners operate over an entire heating
or cooling season.
             
Inverter technology In combination with inverter controlled outdoor units
              
Home leave operation During absence, the indoor temperature can be maintained at a certain level.
           
Fan only The air conditioner can be used as fan, blowing air without cooling or heating.
              
Auto cleaning filter
The filter automatically cleans itself once per day. Simplicity of upkeep means optimum energy efficiency
and maximum comfort without the need for expensive or time-consuming maintenance.
 
Floor and presence sensor
The presence sensor directs the air away from any person detected in the room, when the air flow control is on. The floor
sensor detects the average floor temperature and ensures an even temperature distribution between ceiling and floor.
  
C
omf
or
t
Draught prevention
When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan
to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.
   
Whisper quiet
Daikin indoor units are whisper quiet. Also the outdoor units are guaranteed not to disturb the quiet
of the neightbourhood.
    
Auto cooling-heating changeover Automatically selects cooling or heating mode to achieve the set temperature.
              
Air tr
ea
tmen
t
Air filter Removes airborne dust particles to ensure a steady supply of clean air.
              
Humidit
y
con
tr
ol
Dry programme Allows humidity levels to be reduced without variations in room temperature.
           
Air flo
w
Ceiling soiling prevention A special function prevents air blowing out too long in horizontal position, to prevent ceiling stains.
  
Vertical auto swing
Possibility to select automatic vertical moving of the air discharge louvre, for uniform air flow and temperature
distribution.
      
Fan speed steps Allows to select up to the given number of fan speed.
3 3 3 4 2 3 3 2 3 3 3 3 3 2 3
Individual flap control
Individual flap control via the wired remote controller makes it simple to fix the position of each flap individually,
to suit any new room configuration. Optional closure kits are available as well.
   
Remot
e c
on
tr
ol & timer
Weekly timer Timer can be set to start operation anytime on a daily or weekly basis
              
Infrared remote control Infrared remote control with LCD to start, stop and regulate the air conditioner from a distance. optional optional optional standard optional optional standard optional optional optional
Wired remote control Wired remote control to start, stop and regulate the air conditioner from a distance. optional optional optional optional optional optional optional optional standard optional optional optional optional optional optional
Centralised control Centralised control to start, stop and regulate several air conditioners from one central point. optional optional optional optional optional optional optional optional optional optional optional
O
ther func
tions
Auto-restart The unit restarts automatically at the original settings after power failure.
              
Self-diagnosis Simplifies maintenance by indicating system faults or operating anomalies.
              
Drain pump kit Facilitates condensation draining from the indoor unit. standard standard standard standard standard standard optional standard optional
Twin/triple/double twin application
2, 3 or 4 indoor units can be connected to only 1 outdoor unit even if they have different capacities. All indoor units
operate within the same mode (cooling or heating) from one remote control.
         
Multi model application
Up to 5 indoor units (even different capacities) can be connected to a single outdoor unit. All indoor units
can individually be operated within the same mode.
     
VRV for residential application
Up to 9 indoor units (even different capacities and up to 71 class) can be connected to a single outdoor unit.
All indoor units can individually be operated within the same mode.
     
156 • Control systems
• Benefits overview