Daikin BRC2E52C7 Installation Manual Download Page 42

Page: 42 / 48

Installation manual

BRC2E52C7 / BRC3E52C7

4P368041-1

–

2014.02

Other Service Settings

18-4 Outdoor Unit Status

● Consult the outdoor unit thermistor temperatures.

SkyAir

VRV

Th1

Outdoor air thermistor

Th2

Heat exchanger thermistor

Th3

Discharge pipe thermistor

Th4

Th5

Th6

18-5 Forced Fan ON

● Force the fan(s) ON for the individual indoor units.

● This function can be used to check which indoor unit number is associated with which indoor

unit.

18-6 Switch Main Sub Controller

● Swap the main and sub remote controller designation.

● Changing the main/sub designation requires to turn the power OFF and ON again.

NOTE

18-7 Filter Indicator

● Resets the timer of the filter indicator for all indoor units.

18-8 Test Filter Auto Clean

● Test if filter auto clean works.

● This function is only available if the Self Cleaning Decoration Panel is installed.

● When Filter Auto Clean is disabled (Disable Filter Auto Clean), the message "Auto filter clean

is disabled" will be shown when opening the Test Filter Auto Clean screen.

18-9 Brush/Filter Ind

● Resets the timer of the filter indicator for all indoor units.

● This function is only available if the Self Cleaning Decoration Panel is installed.

18-10 Disable Filter Auto Clean

● Enable/disable the use of the Filter Auto Clean function.

● When disabled, the message "Auto filter clean is disabled" will be shown when opening the

Test Filter Auto Clean and Filter Auto Clean screen.

● This function is only available if the Self Cleaning Decoration Panel is installed.

Summary of Contents for BRC2E52C7
















































Search results

Summary of Contents for BRC2E52C7

Reviews:

Related manuals for BRC2E52C7

Brands by name

Popular brands

Daikin BRC2E52C7, Installation Manual

Search results

Summary of Contents for BRC2E52C7

Reviews:

Related manuals for BRC2E52C7

Brands by name

Popular brands