Installation manual
BRC2E52C7 / BRC3E52C7
15
4P368041-1
–
2014.02
Field settings
6. Field settings
6-1
Enable the Menu/Enter and
Cancel button.To enable, refer to
"4-2 Enable/disable the Menu/
Enter and Cancel button" on
page 12
.
<Basic screen>
6-2
Press and hold the Cancel
button for 4 seconds or longer.
The Service Settings menu is
displayed.
6-2
<Service Settings>
Press and hold the Cancel
button for 4 seconds or
longer while the backlight is
lit.
6-3
Select
Field Settings
and press
the Menu/Enter button.
6-3
Test Operation
Maintenance Contact
Field Settings
Min Setpoints Differential
External input interlock
Group Address
1/3
Service Settings
Setting
Return
Press the Menu/Enter
button.
<Field settings>
In the case of individual
setting per indoor unit
In the case of group
setting
6-4
Highlight the "Mode No.", and
select the desired "Mode No." by
using the
(Up/Down) buttons.
For the most commonly-used field
settings, refer to page
18
.
6-5
In the case of configuring the
indoor units individually during
group control (When Mode No.
such as
20
,
21
,
22
,
23
,
25
are selected), highlight the unit
No. and select the "Indoor unit
Number" to be set by using the
(Up/Down) buttons. (In the
case of configuring as a group,
this operation is not needed.)
6-4
6-5
6-6
Setting
Return
0–
01
4–––
8–––
Field Settings
3–00
7–––
2–00
6–––
1–00
5–––
9–––
Unit No
0
Mode
20
6-4
6-6
Setting
Return
0–
01
4–––
8–––
Field Settings
3–
∗
7–––
2–
∗
6–––
1–
∗
5–––
9–––
Unit No
0
Mode
10
● In the case of individual configuration per indoor
unit, the current settings are displayed.
● SECOND CODE NO. " - " means that there is no
function available
● In the case of configuring as a group, all SECOND
CODE NO. which may be set are displayed as
" * ".
NOTE
FIRST CODE (SW) NO.
SECOND CODE NO.
