13 Configuration
Installer and user reference guide
23
BRK+S7
Wired remote controller
4P513689-1D – 2019.05
Screen
Field settings
Indoor unit
Remote controller
In both case, the setting procedure is the same. For instructions, see
"Setting procedure" on page 23
Setting procedure
Field settings are composed of the following components:
1
Modes ("Mode"),
2
Units ("Unit"),
3
Settings ("SW"), and
4
Values for those settings.
The field settings menus have two levels. You set modes and units
in the first level, and settings and values in the second.
Level
Description
First level
Mode (Mode)
A mode is a group of settable parameters.
In the field settings tables, find available mode numbers in the "Mode" column. Mode
numbers that apply to individual indoor units are between brackets in the "Mode"
column.
Unit (Unit)
(indoor unit field settings only)
A unit is an individual unit to which a setting might apply.
When making field settings for individual units, this is the place where you define the
number of the unit to which the setting applies.
When making field settings for grouped units, you do NOT set the unit number. The
settings will then apply to all indoor units that are part of that group.
