12 Operation
Installer and user reference guide
19
BRK+S7
Wired remote controller
4P513689-1D – 2019.05
2
Use
and
to select an operation mode.
3
Press
to activate.
Result:
The indoor unit changes its operation mode and the
controller returns to the home screen.
12.3
Setpoint
The setpoint is the target temperature for the Cooling, Heating, and
Auto operation modes.
12.3.1
About the setpoint
Home screen setpoint
Depending on configuration, the home screen displays the
temperature setpoint either as a numerical value, or as a symbol.
Numerical
Symbolic
In case the setpoint is a
numerical value, you control the
room temperature by raising or
lowering the setpoint by 1°C
increments.
In case the setpoint is a symbol,
you control the room temperature
by raising or lowering the
setpoint in relation to the
"reference setpoint" (visually
indicated by the marker in the
middle of the thermometer). It is
possible to raise the setpoint
three steps of 1°C above and
three steps of 1°C below the
reference setpoint.
Example:
if the reference
setpoint is 25°C, it is possible to
raise the setpoint to 28°C and
lower it to 22°C..
28°C
+3°C
-3°C
25°C
22°C
INFORMATION
Setpoint control is limited by any limitations set to the
setpoint
range.
For
more
information,
see
"14.5.21 Setpoint range" on page 40
.
▪
Numerical
: it is only possible to raise or lower the
setpoint up/down to the maximum/minimum setpoint
range limits.
▪
Symbolic
: it is only possible to raise or lower the
setpoint up/down to the maximum/minimum setpoint
range limits, despite the set reference temperature.
Example:
if the reference temperature is 25°C, you
can normally lower the setpoint three steps to 22°C.
However, if the minimum setpoint range limit is set to
24°C, you can only lower the setpoint to 24°C.
INFORMATION
For how to set the home screen setpoint and configure the
reference setpoint, see the Madoka Assistant app.
12.3.2
To set the setpoint
Prerequisite:
The active operation mode is either 'Cooling',
'Heating', or 'Auto'.
1
In the home screen, use
and
to adjust the setpoint.
Result:
The indoor unit changes its temperature setpoint.
12.4
Date and time
Set the date and time for the indoor units connected to the controller.
12.4.1
About date and time
Depending on daylight saving time settings, the date and time menu
has the following daylight saving time indicators:
Summer time
Winter time
For more information, see
"Indoor unit field settings" on page 25
(remote controller settings) and
"14.5.7 Date and time" on page 38
(app settings).
12.4.2
To set date and time
1
Navigate to the date and time menu.
2
Press
to activate
.
Result:
The fields become editable.
