Daikin Altherma 3 H HT EPRA18DAW1, Installer'S Reference Manual

Page: 185 / 252

9 | Configuration
Installer reference guide
185
EPRA14~W1 + ET9W
Daikin Altherma 3 H HT F
4P587503-1A – 2020.01
9.5.12 WLAN adapter
INFORMATION
Restriction: WLAN adapter settings are only visible when a WLAN adapter is
installed.
Overview
The following items are listed in the submenu:
D
Wireless gateway
Malfunctioning
Operation
User profile
Room
[D] Wireless gateway
[D.1] Mode
[D.2] WPS
[D.3] Reset
[D.4] Device info
About the WLAN adapter
The wireless LAN adapter connects the heat pump system to the internet. The user
can then control the heat pump system via the Daikin Residential Controller app.
This needs the following components:
a b c
a WLAN adapter The WLAN adapter needs to be installed by the
installer on the indoor unit (on the inside of the
front panel). See:
▪ Installation manual of the WLAN adapter
▪ Addendum book for optional equipment
b Router Field supply.
c Smar app The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface of the indoor unit:
Mode : Turn AP mode ON (= WLAN adapter active as access point) or OFF.