3 Unit installation
Installation manual
7
EGSAH/X06+10DA9W(G)
Daikin Altherma 3 GEO
4P569811-1 – 2019.02
3×
T25
To open the switch box cover of the indoor unit
5
Open the installer switch box as follows:
2×
T25
6
In case you have to install additional options that require access
to the main switch box, remove the main switch box cover as
follows:
4×
3.2.2
To remove the hydro module from the unit
Removing the hydro module is only required for easier transportation
of the unit or for servicing. The removal of the module will
significantly reduce the weight of the unit. This makes the unit easier
to handle and carry.
1
Open the following (see
"3.2.1 To open the indoor unit" on
):
1
User interface panel
2
1
2
Front panel
2
Remove the insulation from the shut-off valves by unfixing the
velcro straps on the back of the valves.
3
Remove the clips that lock the valves in place.
4
Uncouple the piping.
4×
5
Remove the lower hydro module cover.
4×
T25
6
Unlink the connectors that run from the hydro module to the
main switch box or other locations. Route the wires through the
grommets of the upper hydro module cover.
Summary of Contents for Altherma 3 GEO
Page 38: ......
Page 39: ......
Page 40: ...4P569811 1 2019 02 Copyright 2019 Daikin 4P569811 1 0000000S ...
