![background image](http://html.mh-extra.com/html/daikin/4mxs115hv2c/4mxs115hv2c_service-manual_501134018.webp)
Removal of Electrical Box
Si12-996
16
Removal Procedure
8
Disconnect the 2
connectors and detach
the 2 clamps.
[S92]: gas pipe
thermistor connector
[S93]: liquid pipe
thermistor connector
When reassembling, insert
the clamp into the hole.
9
Disconnect the
connector for thermistor
[S90] and detach the
clamp.
[S90]: thermistor
connector (outdoor
temperature, outdoor
heat exchanger,
discharge pipe)
10
The wire harness is
hooked under the
electrical box.
Unhook it and pull out
the clamp.
11
The wire harness for
the compressor is
attached to the partition
plate (1) by the clamp.
Step
Procedure
Points
[S93]
[S92]
(R11088)
(R11089)
gas pipe
thermistor connector
liquid pipe
thermistor connector
thermistor
connector
[S90]
(R11090)
(R11091)
Hook
Clamp
When reassembling, insert
the clamp into the small
hole.
(R11092)
Clamp