SiBE121135
RA Indoor Unit
Operation Manual
191
To set the flaps or louvers at desired position
• This function is effective while flaps or louvers are in auto swing mode.
CAUTION
NOTE
Note on the angles of the flaps
Note on 3-D airflow
In HEAT operation
In FAN operation
Upper limit
Lower limit
Stop operation
COMFORT AIRFLOW
Stop operation
Upper limit
Lower limit
Upper limit
Lower limit
Stop operation
8˚
15˚
50˚
80˚
30˚
70˚
8˚
80˚
Press and when the flaps or louvers have reached the
desired position.
• Always use a remote controller to adjust the angles of the flaps and louvers. If you attempt to
move the flaps and louvers forcibly with hand when they are swinging, the mechanism may
be broken.
• Always use a remote controller to adjust the louvers angles. In side the air outlet, a fan is
rotating at a high speed.
• The flaps swinging range depends on the
operation. (See the figure.)
• Using 3-D airflow circulates cold air, which
tends to collected at the bottom of the room,
and hot air, which tends to collect near the
ceiling, throughout the room, preventing are
as of cold and hot developing.
In DRY operation or
COOL operation
COMFORT
AIRFLOW
• In the 3-D airflow, the flaps and louvers move in turn.
• “ ” or “ ” disappears from the LCD.
