52
Figure 2-51
Please go to the WEB of the M60 to set the window amount and the position information,
please refer to the M60 user
’s manual for detailed information. You can only use keyboard
to read the information, you can not set.
Note:
On the Apply mode, all matrix setups can be changed automatically once you change
the keyboard setup.
On the output all mode, except window split mode, the rest setup can only be applied
to the matrix end once you set on the keyboard and click output video button.
Click save scheme button, you can save current scheme setup. If you have not save, click
reload button, you can go back to previous setup.
Click Close video button, you can close splicing video on the matrix end.
2.4.2 PTZ Control
In the PTZ control mode, you cam use the network keyboard to control the PTZ operation.
The interface is the same as when you are controlling via the Web. You can view the video
from the control channel on the left pane and the PTZ control interface on the right pane.
Click
button, you can go to PTZ interface. Please refer to chapter 2.3.5.5 for
detailed information.
2.5
Platform Mode Detailed Operation
Network keyboard works as a client of the platform. You can use platform to add, manage
device, set TV wall and scheme. Please follow the steps listed below.
Summary of Contents for NKB
Page 1: ...Network Keyboard Quick Start Guide V1 2 0 ...
Page 55: ...54 Figure 2 54 Figure 2 55 ...
Page 64: ...63 ...
