Dahua NKB Quick Start Manual Download Page 41

Page: 41 / 65

from the control channel on the left pane and the PTZ control interface on the right pane.

Please refer to the chapter 2.3.5.5 for detailed information.

2.3.8.4 Menu Operation

The menu interface includes the following items.



Start record: Click it to record current preview video. Or you can click



(REC) to

record.

Please note you need to insert USB device before you begin record operation,

otherwise you can not record. The record files will be saved on the USB device.



Snapshot: Click it to snapshot current video and save as one picture. You can press

button at the top of the joystick to snapshot. The picture can be saved on the flash

disk or on a FTP server. For detailed snapshot setup information, please refer to

chapter 2.3.9.6.



Close preview: Click it to close current preview video.



Close window: Click it to close current window.



Close all: Click it to close all windows.



Open all: Click it to open all windows.

2.3.9 Advanced

The advanced interface includes: RS23, password, AUX, decode, MAC, snap, and

backup. See Figure 2-36.

Figure 2-36

2.3.9.1 RS232

Click RS232 button, you can go to the following interface. See Figure 2-37.

Here you can set remote address, baud rate, data bit, stop bit, and parity.

Summary of Contents for NKB


































































Search results

Summary of Contents for NKB

Reviews:

Related manuals for NKB

Brands by name

Popular brands

Dahua NKB, Quick Start Manual

Search results

Summary of Contents for NKB

Reviews:

Related manuals for NKB

Brands by name

Popular brands