Dahua NKB Quick Start Manual Download Page 61

Page: 61 / 65

Name

Function

①

Preview

It is to display real-time information such as

screen, window, and video source.

②

I/O setup

Here you can set scheme.

③

Back

Click it to back to TV wall.

④

Window split

It is to set preview window display mode.

Note

Splicing screen operation does not support

8-window display mode under platform mode.

⑤

PTZ

Support PTZ lock function for one window. Click

LOCK button to lock or unlock. You can see the

corresponding dialogue box if you have

successfully locked current window. Otherwise

the lock function fails.

Note

The user of higher authority can take the PTZ

control right from the user of the lower authority.

System automatically unlocks if there is no

operation for 30 seconds.

⑥

There are two buttons: tour control/close preview.



Enable/disable tour function: Keyboard has

the operation mode/edit mode. In edit mode,

you can modify tour plan and add video

source to the tour group.



Maximize decode window: Select a screen,

double click or click ENTER button, you can

maximize the screen or restore original size.



Close the video source of one window: Select

a window, click Close preview button, or input

0+CAM.



Close all video sources on the whole screen:

Select a screen, click Close preview button or

input 0+CAM.

⑦

Device

information

Click it to view device channel name or control

SN.

2.5.1 Output video to the wall

Scheme is for you to set video wall information such as window display mode, video

source information and etc.

Split mode:

In this pane, you can set different window display modes.

You can also click number j+MULT to operate. There are two situations:



You have selected a screen under the scheme mode, but there is no display, input

Summary of Contents for NKB


































































Search results

Summary of Contents for NKB

Reviews:

Related manuals for NKB

Brands by name

Popular brands

Dahua NKB, Quick Start Manual

Search results

Summary of Contents for NKB

Reviews:

Related manuals for NKB

Brands by name

Popular brands