Dahua NKB Quick Start Manual Download Page 40

Page: 40 / 65

Name

Function

②

Input/output list

You can select input channel and output

channel in the pane.

③

Window split

Set window display mode in current

pane.

④

Full screen

Click it to preview in full-screen.

⑤

PTZ control

Click it to realize PTZ control.

⑥

Click it to record, snapshot and etc.

⑦

Device information

Click it to view connected device

information.

Note

Except PTZ control and record/snapshot function of the local preview mode can use

button, joystick, shuttle, the rest functions listed here do not support shortcut button.

2.3.8.1 Local preview mode

Local preview is to decode and playback the input channel signal on the keyboard. Please

follow the steps listed below.

1) From output list, network keyboard->local preview, and then double click local

preview.

2) Select window display mode on the window split pane.

3) Select a window; double click an input channel on the input list or you can drag one

channel to a window directly. Now you can preview the video from the selected

channel on current window.

2.3.8.2 Decoder Mode

On the decoder mode, the video from one input channel can be decoded and then output

to an output channel. Please follow the steps listed below.

1) Double click an output channel from an output list. (Not local preview).

2) Select window display mode on the window split pane.

Note

The screen of the decoder will change window display mode at the same time.

3) Select a window; double click an input channel on the input list or you can drag one

channel to a window directly. You can go to

to open preview if you want to

enable keyboard local preview function. Now you can view the input channel video on

current window.

2.3.8.3 PTZ Control

Important

You can only control PTZ after you open preview interface.

In the PTZ control mode, you cam use the network keyboard to control the PTZ operation.

The interface is the same as when you are controlling via the Web. You can view the video

Summary of Contents for NKB


































































Search results

Summary of Contents for NKB

Reviews:

Related manuals for NKB

Brands by name

Popular brands

Dahua NKB, Quick Start Manual

Search results

Summary of Contents for NKB

Reviews:

Related manuals for NKB

Brands by name

Popular brands