31
Name
Function
Zero-encode
Search and add remote device. Please refer to chapter 4.3.3
Zero-channel encode to set.
Main menu
Click to go to the main menu. Please refer to chapter 4.4 Main
menu to set.
4.3.1
Color
It is to set analog channel color such as hue, brightness, contrast, saturation, gain, white level,
color mode and etc.
Step 1 On the preview interface, right click mouse and then select color.
Enter color interface. See Figure 4-15.
Figure 4-15
Step 2 Set parameters.
Name
Function
Period
There are two periods in one day. It is to set different
sharpness, brightness, and contrast setup for different periods.
Hue
It is to adjust video red/green degree.
Sharpness
The value here is to adjust the edge of the video. The value
ranges from 0 to 100. The larger the value is, the clear the
edge is and vice versa. Please note there is noise if the value
here is too high. The default value is 50 and the recommended
value ranges from 40 to 60.
Brightness
It is to adjust monitor window bright. The value ranges from 0
to 100. The default value is 50.
The larger the number, the bright the video is. When you input
the value here, the bright section and the dark section of the
video will be adjusted accordingly. You can use this function
when the whole video is too dark or too bright. Please note the
video may become hazy if the value is too high. The
recommended value ranges from 40 to 60.
Contrast
It is to adjust monitor window contrast. The value ranges from
