Dahua Mobile DVR Series Page 140 User Manual Download

Page: 140 / 172

129

Figure 5-38

Please refer to the following sheet for detailed information.

Parameter Function

Channel

Here you can view channel number.

The number displayed here is the max channel amount of your

device.

Status

There are three statuses: schedule, manual and stop.

Schedule

System enables auto record function as you set in record schedule

setup (general and alarm).

Manual

It has the highest priority.

Enable corresponding channel to record no matter what period

applied in the record setup.

Stop

Stop current channel record no matter what period applied in the

record setup.

Start all/
stop all

Check the corresponding All button, you can enable or disable all

channels to record.

5.6.5

System

5.6.5.1 General

The general interface includes general, date/time.

5.6.5.1.1 General

From main menu->Setup->System->General->General, the general interface is shown as in

Figure 5-39.

Summary of Contents for Mobile DVR Series













































































































































































Search results

Summary of Contents for Mobile DVR Series

Reviews:

Related manuals for Mobile DVR Series

Brands by name

Popular brands

Dahua Mobile DVR Series, User Manual

Search results

Summary of Contents for Mobile DVR Series

Reviews:

Related manuals for Mobile DVR Series

Brands by name

Popular brands