Dahua Mobile DVR Series User Manual Download Page 157

Page: 157 / 172

146

It includes ten statuses: No HDD, HDD error, HDD no space, battery low, temperature high,

turnover, collision, rapid turn, rapid speedup, rapid slowdown.

Here we use No HDD to continue.

From main window->Setup->Vehicle->Abnormality, enter abnormality interface. See Figure 5-63.

Figure 5-63

Please refer to the following sheet for detailed information.

Parameter Function

Event
Type

The abnormal events include: No disk, disk error, disk no space, battery
low, temperature high.

You can set one or more items here.

Enable

Check the box here to enable selected function.

Alarm Out

Please select corresponding alarm output channel when an alarm
occurs. You need to check the box to enable this function.

Latch

The alarm output can delay for the specified time after an alarm stops.
The value ranges from 1s to 300s.

Show
message

System can pop up a message to alarm you in the local host screen if
you enabled this function.

Alarm
upload

System can upload the alarm signal to the center (Including alarm
center.

Send
Email

If you enabled this function, System can send out an email to alert you
when an alarm occurs.

Buzzer

Check the box here to enable this function. The buzzer beeps when
an alarm occurs.

Restart
system

Check the box to enable this function. The system restarts when an
alarm occurs.

5.6.7.7 Display

Display interface includes GUI, and TV adjust.

5.6.7.7.1 GUI

It is to set background color and transparency level.

From main window->Setup->Vehicle->Display, enter display interface. See Figure 5-64.

Summary of Contents for Mobile DVR Series













































































































































































Search results

Summary of Contents for Mobile DVR Series

Reviews:

Dahua Mobile DVR Series, User Manual, Page: 157 / 172

Search results

Summary of Contents for Mobile DVR Series

Reviews: