43
button to drag the overlay title to the corresponding position.
Note
Plate title can control the plate and alarm title at the same time.
Step 3 Click Save button.
4.8.1.3 Snapshot
Please install HDD or set FTP. Refer to chapter 4.12.4 FTP to set FTP parameters.
The snapshot includes regular snapshot and event snapshot.
When these two modes are enabled at the same time, the event snapshot has higher priority than
regular snapshot. If there is corresponding alarm, then the event snapshot is triggered. If there is
no alarm, then regular snapshot is valid.
Step 1 From Main menu->Setting->System->Encode, click Snapshot button.
Enter Snapshot interface. See Figure 4-36.
Figure 4-36
Step 2 Set parameters.
Snapshot mode: There are two modes: regular and event. If you set regular mode, you need
to set snapshot interval. If you set event snapshot, you need to set snapshot activation
operation.
Image size: It depends on the connected camera resolution. The default setup is 960H.
Image quality: Here you can set snapshot quality. The value ranges from 1 to 6. The 6 has
the highest image quality.
Interval: It is for you to set timing (schedule) snapshot interval.
Step 3 Click Schedule setup button, the interface is shown as in Figure 4-37.