Dahua Mobile DVR Series User Manual Download Page 150

Page: 150 / 172

139

Parameter

Function

Address

Set corresponding dome address. Default value is 1.

Please

note your setup here shall comply with your dome address;

otherwise you cannot control the speed dome.

Baud Rate

Select the dome baud rate. Default setup is 9600.

Data Bit

Default setup is 8. Please set according to the speed dome dial
switch setup.

Stop bit

Default setup is 1. Please set according to the speed dome dial

switch setup.

Parity

Default setup is none. Please set according to the speed dome dial
switch setup.

5.6.6

Information

5.6.6.1 Version

From main menu->Info->Version, the version interface is shown as in Figure 5-52.

Here you can view system hardware features, software version, release date and etc. Please note

the following information for reference only.

Figure 5-52

5.6.6.2 Log

From main menu->Info->Log, enter system log interface. See Figure 5-53.

Summary of Contents for Mobile DVR Series













































































































































































Search results

Summary of Contents for Mobile DVR Series

Reviews:

Dahua Mobile DVR Series, User Manual, Page: 150 / 172

Search results

Summary of Contents for Mobile DVR Series

Reviews: