Installation 12
Put the fixing ring
⑦
and the enclosure
⑥
back on, and then connect the device
⑤
to
Step 5
power source and the XVR device, and the live view screen is displayed.
Aim the lens to the ideal angle, see Figure 3-12.
Step 6
Model F adjustment
Figure 3-12
Installing Model G (1) and Model G (2)
3.7
Model G (1) and Model G (2) installation
Figure 3-13
Table 3-7 Installation item list
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Positioning map
③
Expansion bolt
④
Pedestal
⑤
Self-tapping screw
⑥
Device
⑦
Locking screw
⑧
Enclosure
Loosen the locking screw
⑦
with the supplied wrench and take the pedestal
④
off.
Step 1
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 2
the mounting surface
①
) as the positioning map
②
shows and drill them on the
mounting surface
①
, and then insert the expansion bolts
③
in the screw holes.
Align the screw holes on the pedestal
④
to those on the mounting surface
①
, and then
Step 3
pull the cable out through mounting surface or the side cable tray. Attach the pedestal
④
to the mounting surface
①
with the self-tapping screws
⑤
.
