Installation 6
Aim the lens to the ideal angle, and then adjust the focus and zoom until you get clear
Step 5
image, see Figure 3-2. Fasten the fixing ring
⑤
afterwards.
Model A adjustment
Figure 3-2
Installing Model B (1) and Model B (2)
3.2
Model B (1) and Model B (2) installation
Figure 3-3
Table 3-2 Installation item list
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Self-tapping screw
⑤
Device
⑥
Locking screw
⑦
Enclosure
—
—
Loosen the locking screw
⑥
with the supplied wrench and take the pedestal
③
off.
Step 1
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 2
the mounting surface
①
) and drill them on the mounting surface
①
, and then insert the
expansion bolts
②
in the screw holes.
Align the screw holes on the pedestal
③
to those on the mounting surface
①
, and then
Step 3
pull the cable out through mounting surface or the side cable tray. Attach the pedestal
③
to the mounting surface
①
with the self-tapping screws
④
.
