Installation 5
3
Installation
Make sure the mounting surface is strong enough to hold at least three times of the camera
weight.
The following figures are for reference only, and the actual product shall prevail.
Installing Model A
3.1
Model A installation
Figure 3-1
Table 3-1 Installation item list
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Self-tapping screw
⑤
Fixing ring
⑥
Enclosure
⑦
Device
—
—
Hold the fixing ring
⑤
tightly and rotate the pedestal
③
counterclockwise to take it off.
Step 1
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 2
the mounting surface
①
) and drill them on the mounting surface
①
, and then insert the
expansion bolts
②
in the screw holes.
Align the screw holes on the pedestal
③
to those on the mounting surface
①
, and then
Step 3
pull the cable out through mounting surface or the side cable tray. Attach the pedestal
③
to the mounting surface
①
with the self-tapping screws
④
.
Put the fixing ring
⑤
and the enclosure
⑥
back on to the hold the device
⑦
, and then
Step 4
connect the device
⑦
to power source and the XVR device, and the live view screen is
displayed.
