Installation 10
Installing Model E
3.5
Model E installation
Figure 3-9
Table 3-5 Installation item list
No.
Item
No. Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Screw cover
⑤
Self-tapping screw
⑥
Device
⑦
Enclosure
⑧
/
⑨
Locking screw
Loosen the locking screws
⑧
/
⑨
with the supplied wrench and take the pedestal
③
off.
Step 1
Confirm the position of screw holes (and the cable outlet hole if it needs to go through
Step 2
the mounting surface
①
) and drill them on the mounting surface
①
, and then insert the
expansion bolts
②
in the screw holes.
Align the screw holes on the pedestal
③
to those on the mounting surface
①
, and then
Step 3
pull the cable out through mounting surface or the side cable tray. Put the screw covers
in the screw holds on the pedestal
③
, and then attach the pedestal
③
to the mounting
surface
①
with the self-tapping screws
④
.
Put the locking screws
⑧
/
⑨
and the enclosure
⑦
back on to the hold the device
⑥
,
Step 4
and then connect the device
⑥
to power source and the XVR device, and the live view
screen is displayed.
Aim the lens to the ideal angle, and then fasten the locking screws
⑧
/
⑨
, see Figure
Step 5
3-10.
