Dahua ITC231-RF1A-IR User Manual Download Page 112

Page: 112 / 113

7 FAQ

Bug

Solution

I cannot boot up
the device.

Please click RESET button for at least five seconds to restore
factory default setup.

TF card hot swap

Before draw out TF card, please stop record or snapshot first and
then wait for at least 15 seconds to remove the TF card.

All the operations before is to maintain data integrity.

TF card write times

Do not set the TF card as the storage media to storage the schedule
record file. It may damage the TF card duration.

I cannot use the
disk as the storage
media.

When disk information is shown as hibernation or capacity is 0,
please format it first (Via Web).

I cannot upgrade
the

device

via

network.

The status indication light is shown as red when network upgrade
operation failed. You can use port 3800 to continue upgrade.

Recommended TF
card brand

Kingston 4GB, Kingston 1GB, Kingston 16GB, Transcend 16GB,
SanDisk 1G, SanDisk 4G

Usually we recommend the 4GB (or higher) high speed card in case
the slow speed results in data loss.

Web control
webrec.cab not
pop up

Please set IE security level to low and enable ActiveX plug-in.

Warning:

This version of explorer supports win10+IE11, Chrome and Firefox explorers in Windows system.

Note:



This manual is for reference only. Slight difference may be found in the user interface.



All the designs and software here are subject to change without prior written notice.



All trademarks and registered trademarks mentioned are the properties of their respective

owners.



If there is any uncertainty or controversy, please refer to the final explanation of us.



Please visit our website or contact your local retailer for more information.

Summary of Contents for ITC231-RF1A-IR


















































































































Search results

Summary of Contents for ITC231-RF1A-IR

Reviews:

Related manuals for ITC231-RF1A-IR

Brands by name

Popular brands

Dahua ITC231-RF1A-IR, User Manual

Search results

Summary of Contents for ITC231-RF1A-IR

Reviews:

Related manuals for ITC231-RF1A-IR

Brands by name

Popular brands