Dahua ITC231-RF1A-IR User Manual Download Page 5

Page: 5 / 113

About the Manual



The Manual is for reference only. If there is inconsistency between the Manual and the

actual product, the actual product shall govern.



All the designs and software are subject to change without prior written notice. The

product updates might cause some differences between the actual product and the

Manual. Please contact the customer service for the latest program and supplementary

documentation.



There still might be deviation between the actual value of some data and the value

provided, if there is any doubt or dispute, please refer to our final explanation.



Please contact the supplier or customer service if there is any problem occurred when

using the device.



We are not liable for any loss caused by the operations that do not comply with the

Manual.



All trademarks, registered trademarks and the company names in the Manual are the

properties of their respective owners.



Please visit our website or contact your local service engineer for more information.



If there is any uncertainty or controversy, please refer to our final explanation.

Summary of Contents for ITC231-RF1A-IR


















































































































Search results

Summary of Contents for ITC231-RF1A-IR

Reviews:

Related manuals for ITC231-RF1A-IR

Brands by name

Popular brands

Dahua ITC231-RF1A-IR, User Manual

Search results

Summary of Contents for ITC231-RF1A-IR

Reviews:

Related manuals for ITC231-RF1A-IR

Brands by name

Popular brands