System Operation 14
Parameter Description
Card
You can register five cards for each user. On the card registration interface,
enter your card number or swipe your card, and then the card information will be
read by the access controller.
You can enable the Duress Card function on the card registration interface.
Alarms will be triggered if a duress card is used to unlock the door.
If the access controller is without card reading module, you need to connect the
device to peripheral card readers.
Password
The door unlocking password. The maximum length of the password is 8
characters.
If the access controller is without touch screen, you need to connect the access
controller to a peripheral card reader. There are buttons on the card reader.
Level
You can select a user level for new users. There are two options.
User: Users only have door unlock authority.
Admin: Administrators can not only unlock the door but also have
parameter configuration authority.
In case that you forget the administrator password, you had better create more
than one administrator.
Period
You can set a period in which the user can unlock the door. For detailed period
settings, see the user manual.
Holiday
Plan
You can set a holiday plan in which the user can unlock the door. For detailed
holiday plan settings, see the configuration manual.
Valid Date
You can set a period during which the unlocking information of the user is valid.
User Level
There are six levels:
General: General users can unlock the door normally.
Blacklist: When users in the blacklist unlock the door, service personnel will
get a prompt.
Guest: Guests are allowed to unlock the door certain times in certain
periods. Once they exceed the maximum times and periods, they cannot
unlock the door again.
Patrol: Patrolling users can get their attendance tracked, but they have no
unlock authority.
VIP: When VIP unlocks the door, service personnel will get a prompt.
Special: When special people unlock the door, there will be a delay of 5
seconds before the door is closed.
Use Time
When the user level is
Guest
, you can set the maximum times that the guest
can unlock the door.
After you have configured all the parameters, tap
to save the configuration.
Step 3
A new user is created.
For access controllers without touch screen, you need to create users through
management platforms. See details in the user manual.
