Installation 10
Installation diagram (2)
Figure 2-7
Installation Procedure
This document uses a 7-inch model A access controller as an example.
Drill seven holes (six bracket installation holes and one cable entry) in the wall
Step 1
according to holes in the bracket.
Fix the bracket on the wall by installing the expansion screws into the six bracket
Step 2
installation holes.
Connect cables for access controller.
Step 3
Hang the access controller on the bracket hook.
Step 4
Tighten the screws at the bottom of the access controller.
Step 5
The installation is completed.
You need to apply silicon sealant to the cable outlet of 7-inch model B access controller. See
