Dahua DH-XVR5104HS-4KL-I3 User Manual Download Page 231

Page: 231 / 389

User’s Manual

222

Parameter

Description

Buzzer

Select the checkbox to activate a buzzer noise at the Device.

Log

Select the checkbox to enable the Device to record a local alarm log.

Alarm Tone

Select to enable audio broadcast in response to a face detection event.

White Light

Select the checkbox to enable the white light alarm of the camera.

Siren

Select the checkbox to enable the sound alarm of the camera.

Click Apply to complete the settings.

5.11.2.3.2

Searching for and Playing Detected Faces

You can search the detected faces and play back.

Select Main Menu > AI > AI Search > Face Detection.

Face detection

Select the channel, enter the start time and end time, and set for the gender, age, glasses,
beard, and mask.

Click Smart Search.

The results are displayed.

Summary of Contents for DH-XVR5104HS-4KL-I3






































































































































































































































































































































































































Search results

Summary of Contents for DH-XVR5104HS-4KL-I3

Reviews:

Brands by name

Popular brands

Dahua DH-XVR5104HS-4KL-I3, User Manual

Search results

Summary of Contents for DH-XVR5104HS-4KL-I3

Reviews:

Brands by name

Popular brands