Dahua DH-XVR5104HS-4KL-I3 User Manual Download

Page: 138 / 389

User’s Manual

129

5.7.1

Enabling Record Control



Manual recording operation requires the user have the permission to access STORAGE settings.



Check to ensure the HDD installed in the Device has been formatted properly.

To enter the record control page, do the following:

Right-click on the live view screen, the shortcut menu is displayed. On the shortcut menu,
select Manual Control > Record Control.

Record mode

Configure the settings for the record control parameters.

Table 5-24

Record control parameters

Parameter

Description

Channel

Displays all the analog channels and the connected digital channels. You can
select a single channel or select All.

Main Stream/Sub
Stream

Auto: Automatically record according to the record type and recording
time as configured in the recording schedule.

Manual: Keep general recording for 24 hours for the selected channel.

Stop: Do not record.

Snapshot

Enable or disable the scheduled snapshot for the corresponding channels.

Click Apply.

Summary of Contents for DH-XVR5104HS-4KL-I3






































































































































































































































































































































































































Search results

Summary of Contents for DH-XVR5104HS-4KL-I3

Reviews:

Related manuals for DH-XVR5104HS-4KL-I3

Brands by name

Popular brands

Dahua DH-XVR5104HS-4KL-I3, User Manual

Search results

Summary of Contents for DH-XVR5104HS-4KL-I3

Reviews:

Related manuals for DH-XVR5104HS-4KL-I3

Brands by name

Popular brands