User’s Manual
58
For Bulk priority, the upload and download rates are both 1000 bit. The data
streams with Bulk priority starts to be sent after the data streams with other
priorities are sent.
When there is only one level of data stream, the bandwidth of the data stream is
limited only by the upload and download restrictions in QoS Settings.
When a connection meets the control conditions in both MAC priority and
netmask priority, the rule added first shall prevail.
Click
Save
to save the configuration.
Step 5
Click
Apply Settings
to apply the configuration.
Step 6
(Optional) Click
Cancel Changes
to cancel the configuration.
Step 7
Serial Applications
3.11
The console port of the Router is usually used as a console, but you can configure it to an
ordinary serial port by the built-in serial port to TCP/IP application of the Router. After
configuration, the console port of the Router can be used as a serial protocol conversion device,
or it can be equivalent to a DTU device.
Log in to the web interface of the Router.
Step 1
In the left navigation menu, select
Applications > Serial Applications
.
Step 2
In
Serial Applications
, select
Enable
, and then set parameters.
Step 3
Enable serial applications
Figure 3-51
Summary of Contents for DH-WM4700-O
Page 88: ...User s Manual...
