User’s Manual
33
Enable PPTP server
Figure 3-23
Table 3-17 Description of PPTP server parameters
Parameter
Description
Broadcast support
Set whether to enable broadcast or not.
Force MPPE Encryption
Set whether to mandatorily enable MPPE (Microsoft Point-to-Point
Encryption) encription of PPTP data.
DNS1
Set as needed.
DNS2
WINS1
WINS2
Server IP
Enter IP address of the Router as PPTP server, which should be
different from the LAN address.
Client IP(s)
Enter IP addresses that are assigned to the clients. The format is
xxx.xxx.xxx.xxx-xxx.
CHAP-Secrets
User name and password of the client when using PPTP service.
Client IP must be different with IP assigned by Router DHCP.
The format of CHAP Secrets: "user * password *".
Click
Save
to save the configuration.
Step 4
Click
Apply Settings
to apply the configuration.
Step 5
(Optional) Click
Cancel Changes
to cancel the configuration.
Step 6
3.6.1.2 PPTP Client
Log in to the web interface of the Router.
Step 1
Summary of Contents for DH-WM4700-O
Page 88: ...User s Manual...
