User’s Manual
32
3.5.5 Telnet
Telnet is a terminal emulation protocol that is commonly used on the Internet and TCP/IP-based
networks. It allows end users or computers to log in to remote devices and run programs.
You can enable a telnet server to connect to the Router with telnet. The username is admin and
the password is the Router's password.
If you use the Router in an untrusted environment (for example as a public hotspot), it is
strongly recommended to use SSH and disable telnet.
Log in to the web interface of the Router.
Step 1
In the left navigation menu, click
Services
.
Step 2
In
Telnet
section, enable or disable Telnet.
Step 3
Click
Save
to save the configuration.
Step 4
Click
Apply Settings
to apply the configuration.
Step 5
(Optional) Click
Cancel Changes
to cancel the configuration.
Step 6
3.5.6 WAN Traffic Counter
Log in to the web interface of the Router.
Step 1
In the left navigation menu, click
Services
.
Step 2
In
WAN Traffic Counter
section, enable or disable traffic counter.
Step 3
Click
Save
to save the configuration.
Step 4
Click
Apply Settings
to apply the configuration.
Step 5
(Optional) Click
Cancel Changes
to cancel the configuration.
Step 6
VPN
3.6
3.6.1 PPTP
3.6.1.1 PPTP Server
Log in to the web interface of the Router.
Step 1
In the left navigation menu, select
VPN > PPTP
.
Step 2
In
PPTP Server
section, enable
PPTP Server
, and set parameters.
Step 3
Summary of Contents for DH-WM4700-O
Page 88: ...User s Manual...
