User’s Manual
24
3.3.6.2 Port Setup
You can set the properties of each port. Take ra0 port as an example.
Log in to the web interface of the Router.
Step 1
In the left navigation menu, select
Setup > Networking
.
Step 2
In
Port Setup
section, select
Unbridged
next to
Network Configuration ra0
.
Step 3
Set properties of the selected port.
Step 4
Port setup
Figure 3-15
Table 3-12 Parameter description of port setup
Parameter
Description
MTU
Maximum transmission unit, 1500 bytes by default.
Multicast
forwarding
Set whether to enable multicast forwarding.
Masquerade/NAT
Set whether to enable Masquerade/NAT.
IP Address
Set IP address of selected port. It cannot conflict with other ports or
bridges.
Subnet Mask
Set subnet mask of the selected port.
Click
Save
to save the configuration.
Step 5
Click
Apply Settings
to apply the configuration.
Step 6
(Optional) Click
Cancel Changes
to cancel the configuration.
Step 7
3.3.6.3 DHCPD
You can use multiple DHCP service.
Log in to the web interface of the Router.
Step 1
In the left navigation menu, select
Setup > Networking
.
Step 2
Summary of Contents for DH-WM4700-O
Page 88: ...User s Manual...
